Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Kite Knife 8" Yellow Plastic

Kite Knife 8

This is a great kite knife made from yellow toughened plastic it has a single internal blade. And comes with a carry case with a loop hole for connecting to harnesses or belt straps.
Comes in black or the prefered yellow.

find out more

19.00

KiteboardingUK.com IKO/BKSA Discovery Kiteboarder Program 1 Day Only - £130 Email Us for more info!

KiteboardingUK.com IKO/BKSA Discovery Kiteboarder Program 1 Day Only - 130 Email Us for more info!


Please email us for dates and availability of the lessons!


Course Description
A-1
*Carry and set up the lines and kite
*Determine the wind direction and upwind and downwind (windward, leeward).
*Pilot a small kite (inflatable, stunt kite, foil…) on the wind window edge and maintain it close to the ground.
*Know how to stop the kite power in case of problem by releasing the bar. Be aware that the kite leash must be worn at all times, before kite launching and until landing.

B-1
*Be aware of the area where the kite can fall down wind to the pilot.
*Recover the kite on land.
*Position the kite on request from 9 to 3 o’clock on the wind window edge.
*Launch a kite with an assistant and choose the right angle to the wind.
*Pilot the kite in the power area without crashing it.
*Twist and untwist the lines while the kite flies.
*Recover a kite and secure it on land.
*Land a kite with the help of an assistant.

C-1
*Pilot a kite hooked to the harness.
*Pilot hooked to the harness with one hand.
*Activate the harness release system or quick release located on a leader line.

D-1
*Perform a downwind course by body dragging and using the power of the kite.

E-1
*Relaunch a kite from the water.
*Wind the lines in the water and recover the kite.
*Perform a self-rescue in deep water.
*Launch a kite alone on land.
*Identify potential wind obstacles creating lift or down draft and be able to define the wind direction. Understand that practice with onshore wind is dangerous.

With KiteboardingUK one day course you will also get the chance to kiteboard for the first time, Using a directional or twin tip you will take your first water starts and hopefully your first ride. At the end of the course you will be a Kiteboarder level 1

find out more

spacer

Antennas

Online Catalogue | Chandlery/Marine |  Antennas

Banten 25cm Emergency Antenna 0045Banten 25cm Emergency Antenna 0045
25cm Emergency Antenna. Essential safety equipment. Bantens emergency antenna is ready to go and can be transmitting in minutes. Is wired up with a PL connector for immediate attachment, two straps that will fit any rail or stanchion and 5m of cable. Supplied in its own weatherproof storage canister it won't get damaged or tangled in the locker.

Specification

Banten Part: 0045
Antenna: Fibreglass 25cm
Frequency: 156.8Mhz
Gain: 0db
Max Input: 50W
SWR: 1.5
Cable: 5m with PL Connector


Price: 59.99 (Including VAT at 20%)


Quantity:  

Banten 25cm Digital TV Stub 331 excluding bracketBanten 25cm Digital TV Stub 331 excluding bracket
25cm DIGITAL TV STUB AERIAL
This new TV antenna is designed to provide great digital reception.

•5m coax cable with brass antenna joining piece
•F connector for free end
•Gain control with 12v-24v power
•Screw adaptor to fit all standard brackets
Fitting Options
A bracket is required.
Part cu17734 a dedicated, compact white nylon screw down bracket that replaces the adaptor supplied
Part cu17750 15m cable and a white masthead bracket.
All standard deck or rail mounted VHF brackets also fit straight onto the TV stub.

Specification:
Banten Part 331
Frequency 175-240/470-860 MHz
Gain 24 db
Impedance 75 ohm
Output voltage +26 dbm
Noise 1.9 db
Antenna supply 12V DC ? 50 mA
Connection F female
Diameter 25 cm
Weight 100g (3.5 oz)
Cable 5 metre, low loss
Base fitting Pipe diameter 12mm or adapter included for 1 inch-14 thread

Price: 62.00 (Including VAT at 20%)


Quantity:  

Bantan Fixed Bracket for TV Stub Compact Nylon Screw DownBantan Fixed Bracket for TV Stub Compact Nylon Screw Down
Compact nylon fitting. The TV stub antenna bracket also fits all other aerials

Price: 9.00 (Including VAT at 20%)


Quantity:  

Banten Windex 1m Stainless VHF Antenna Masthead Kit 153Banten Windex 1m Stainless VHF Antenna Masthead Kit 153
The kit contains an integrated Windex wind vane and all you need for a masthead fitting.

•Windex, tacking tabs and collar fitting
•Stainless steel 1.0m whip
•18m of coax cable with antenna joining pieces
•Stand-off white L masthead bracket with antenna fixing
•Male PL connector for free end of coax
•Also fit with any standard deck or rail mounted brackets.

Specification:
Stainless steel whip stainless steel whip
Frequency 156-163 MHz
S.W.R. 1.1
Gain 0 db
Impedance 50 ohm
Max Input 50W
DC closed Yes
Weight 400g (14 oz)
Cable 18m (60ft) RG-58
Termination SO 239 female
Base fitting L bracket


Price: 75.00 (Including VAT at 20%)


Quantity:  

Banten 1.0m Stainless VHF Antenna Masthead Kit 152Banten 1.0m Stainless VHF Antenna Masthead Kit 152
The kit contains all you need for a masthead fitting:
Stainless steel 1.0m whip
18m of coax cable
Antenna joining pieces
Stand-off white L masthead bracket
Antenna fixing
Male PL connector for freeend of coax

Also fit with any standard deck or rail mounted brackets.

Specification:
Stainless steel whip 1m (3.3ft)
tapered stainless steel whip
Frequency 156-163 MHz
S.W.R. 1.1
Gain 0 db
Impedance 50 ohm
Max Input 50W
DC closed Yes
Weight 350g (12 oz)
Cable 18m (60ft) RG-58
Termination SO 239 female
Base fitting White aluminium stand-off L bracket

Price: 41.00 (Including VAT at 20%)


Quantity:  

Online Catalogue | Chandlery/Marine |  Antennas

spacer
spacer