This is a great kite knife made from yellow toughened plastic it has a single internal blade. And comes with a carry case with a loop hole for connecting to harnesses or belt straps. Comes in black or the prefered yellow.
Please email us for dates and availability of the lessons!
Course Description A-1 *Carry and set up the lines and kite *Determine the wind direction and upwind and downwind (windward, leeward). *Pilot a small kite (inflatable, stunt kite, foil ) on the wind window edge and maintain it close to the ground. *Know how to stop the kite power in case of problem by releasing the bar. Be aware that the kite leash must be worn at all times, before kite launching and until landing.
B-1 *Be aware of the area where the kite can fall down wind to the pilot. *Recover the kite on land. *Position the kite on request from 9 to 3 oclock on the wind window edge. *Launch a kite with an assistant and choose the right angle to the wind. *Pilot the kite in the power area without crashing it. *Twist and untwist the lines while the kite flies. *Recover a kite and secure it on land. *Land a kite with the help of an assistant.
C-1 *Pilot a kite hooked to the harness. *Pilot hooked to the harness with one hand. *Activate the harness release system or quick release located on a leader line.
D-1 *Perform a downwind course by body dragging and using the power of the kite.
E-1 *Relaunch a kite from the water. *Wind the lines in the water and recover the kite. *Perform a self-rescue in deep water. *Launch a kite alone on land. *Identify potential wind obstacles creating lift or down draft and be able to define the wind direction. Understand that practice with onshore wind is dangerous.
With KiteboardingUK one day course you will also get the chance to kiteboard for the first time, Using a directional or twin tip you will take your first water starts and hopefully your first ride. At the end of the course you will be a Kiteboarder level 1
This is a freestyle board for the mere mortals among us. The Monk offers untamed sailing without the limitations normally associated with this style of riding. Hyperflex tips (created using our new FS mould) and our new constant curve work together to create the easiest to access (yet limitless) ride ever seen.
A back door into the high performance world of kiteboarding or simply reality personified .. you decide.
FEATURES The Monk features Constant Curve Rocker Template with dynamic concave Shinn FS deck mould with bi-axis tip flex Hand polished, high gloss UV resistant Deck finish Sanded base for high efficiency Full range of widths for all size riders 53mm hi-visibility G10 fins with transparent deck mounting plates The Sneaker 3D adjustable footbed system Spray free riding in all conditions Mostly Alabasia wood core
Choosing your size. Whilst many riders still look at the length of the board when choosing their size it's much more relevant to look at the width. The length of the board can be affected by the shaping of the tip and tail - which in reality plays no part in the performance of the board. To clarify the situation further the difference in surface area between a 130 x 40 and a 130 x 42 is approximately 260 cm2 whilst increasing the length of a 130 x 40 to 135 x 40 would give an increase in surface area of less than 200 cm2 ? nearly 25% less. All of our boards are available in multiple widths to allow you to find the perfect size for your weight, riding style and favoured riding conditions.
FINS All Shinn boards are supplied with high-grade G-10 fins. G-10 is created by laminating multiple layers of glass cloth with Epoxy resin and allowing to cure under extreme conditions of pressure and heat. The resulting laminate is renowned for it"s high shear strength and impact resistance making it the best material for fin production. Hi visibility red pigments are added to the laminate during creation to ensure your board is easy to find in the water. Many suppliers coat the fins after shaping however this finish is susceptible to wearing off through repeated abrasion with sand. Shinn only uses Marine grade M6 INOX bolts for fixing the screws The transparent deck washer the fin bolts mount through is designed to spread the load from the screw heads and protect your board in case of impact.
ROCKER Constant Radius ? this rocker uses a constant radius curve through out it's length. Some years ago this rocker would have been considered to be slow to plane and poor upwind but advances in flex control, concave hull shapes and of course kites now mean it can be used to provide un-paralleled control, limitless grip and completely spray free riding in all conditions. The outline of your board works in conjunction with the rocker to define the way it will perform. Freestyle - This outline style features more curve radius between the feet leading into straighter, larger diameter curves in the tip and tail. On the water this translates into strong edge grip, aggressive POP and fast turning when applying pressure equally through both feet.
CORE What's inside your board will make a huge difference to how it performs and in keeping with every aspect of your Shinn board we use only the best on the inside, and that means wood ? mostly! No other core material offers the same blend of consistent flex over extended periods of time, feather like weight and near indestructible durability (not to mention environmental friendliness). We say mostly because there are some other secret materials in there but we"re not going to give away all of our tricks!
FLEX AND MOULD The 3D shaping of the deck moulds on all Shinn boards is a blend of functionality and form. FS Mould ? new for the Monk - This mould is designed to provide you with the ultimate in comfort and control. It's unique ovalized, central platform creates extreme amounts of tail flex through both axis yet maintains rigidity underfoot to ensure planning performance and upwind ability are un-hindered. It's no wonder some testers call it the magic carpet.